10458c - 5 ghz high power pin photodiode receiver the 10458c pin microwave photodiode receiver incorporates a high-speed planar pin photodiode, with low-noise bias and monitor electronics. the units installs in emcores system 10000 3ru equipment rack providing a highly reliable, high- power photodiode receiver. the receiver is well matched over the operating frequency band, thereby simplifying high-speed integration. features highly reliable planar photodiode technology ? high power capability ? bandwidth up to 5 ghz ? good rf matching, 12 db typ. ? microwave applications parameter min typical max units storage temperature -40 - +85 c operating temperature -10 25 +50 c responsivity 0.7 - - a/w receiver gain (1 ghz) -9.1 - - db (a/w) dark current (25c) - - 5 na max current - - 10 ma optical input - - 11 dbm rf return loss 8 12 - db optical wavelength range 1280 - 1580 nm optical return loss - - -40 db module dc current (pin 1) - - 200 ma antenna remoting ? military communications ? phased arrays ? ew ? delay lines for radar calibration ? performance highlights parameter symbol condition min typical max units bandwidth f 3db 10458c 0.05 - 5 ghz impedance z resistively matched sma connector - 50 - ohm s21 flatness - 50 mhz C 5 ghz - 2 4 db p-p specifi ed characteristics apply for the recommended operating conditions at beginning of life, 25c, unless noted otherwise. typical s21 data rf characteristics 50 mhz 22 ghz copyright ? 2008 emcore corporation 505 332 5000 505 332 5100 photovoltaic-sales@emcore.com www.emcore.com copyright ? 2010 emcore corporation 626 293 3400 626 293 3428 satcom-sales@emcore.com ww w.emcore.com
10458c - 5 ghz high power pin photodiode receiver ordering information model number description 10458c-sa receiver 5 ghz, sma, ac coupled, sc/apc 10458c-fa receiver 5 ghz, sma, ac coupled, fc/apc 10990a system 10000 equipment chassis, 3 ru 10901g-na system 10000 power supply, us power cord 10901g-uk system 10000 power supply, uk power cord 10901G-EU system 10000 power supply, eu power cord outline drawing microwave pinout pin number description 1 +15vdc 2 no connection 3 no connection 4 ground 5 1 ground 6 1 photodiode current monitor 1v / 1 ma 7 1,2 received optical power alarm 8 1 no connection 9 1 no connection rev: december 10, 2010 1. pins 5 - 9 can be be monitored at the rear of the system 10000 chassis 2. open collector alarm, external 1k pull-up required. capable of sinking 20 ma. copyright ? 2008 emcore corporation 505 332 5000 505 332 5100 photovoltaic-sales@emcore.com www.emcore.com copyright ? 2010 emcore corporation 626 293 3400 626 293 3428 satcom-sales@emcore.com ww w.emcore.com
|